1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")
|
3. |
Remove IPM(Intelligent intergrated Platform Module) connector
(A), bolts and nut.
|
4. |
Remove IPM after removing rear connectors.
|
Starter Cleaning
1.
Do not immerse parts in cleaning solvent.
Immersing the yoke assembly and/or armature will damage the insulation
wipe these parts with a cloth only.
...
Interior B
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Rear Differential Carrier Disassembly
Rear differential carrier disassembly
1.
Drain oil by removing the drain plug (A) and filler plug (B) before
disassembling the rear differential carrier.
...