Kia Sorento: SS-A Solenoid Valve(ON/OFF)

SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.

SS-A Solenoid valve(ON/OFF) is installed at valve body.

Removal

   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Specifications

ON/OFF Solenoid Valve(SS-A) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

See also:

SRS Control Module (SRSCM) Variant coding
After replacing the SRSCM with a new one, MUST perform the “Variant Coding” procedure.    1. ...

Steering Column and Shaft Removal
1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the fro ...

Shift Lever Removal
1. Remove the floor console. (Refer to Body - "Floor console") 2. Remove the air duct. 3. Dis ...