• |
Monitors the vehicle's operating conditions to determine the optimal
gear setting.
|
• |
Performs a gear change if the current gear setting differs from
the identified optimal gear setting.
|
• |
Determines the need for damper clutch (D/C) activation and engages
the clutch accordingly.
|
• |
Calculates the optimal line pressure level by constantly monitoring
the torque level and adjusts the pressure accordingly.
|
• |
Diagnoses the automatic transaxle for faults and failures.
|
Compression Pressure Inspection
If the there is lack of power, excessive oil consumption or poor fuel
economy, measure the compression pressure.
...
Fuel Pump Motor Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).
...
Instrument Cluster Inspection
1.
Check the suspected area as below table when the warning light
is error.
NO
Warning light
Description
Communicatio ...