Kia Sorento: Transaxle Oil Temperature Sensor Description - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Transaxle Oil Temperature Sensor Description

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Description

Transaxle Oil Temperature Sensor(OTS) monitors the automatic transaxle fluid's temperature and conveys the readings to TCM. It is an Negativen Thermal Coefficient(NTC) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is used to identify damper clutch activation and deactivation zones within the low temperature and high temperature range and to compensate hydraulic pressure levels during gear changes.

Transaxle Control Module (TCM) Installation
   When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Transaxle Oil Temperature Sensor Specifications
▷ Type: Negative Thermal Coefficient Type(NTC) Temp.(°C)°F Resistance (kΩ) (-40)-40 48.1 (-20)-4.0 15.6 (0)32 ...

See also:

Water pump Components
1. Water pump pulley 2. Water pump 3. Water pump gasket 4. Water pump housing 5. Water pump housing gasket 6. O-ring 7. Water inlet pipe ...

Accelerator Pedal Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Shift Cable Adjustment
Adjusting method for T/M control cable 1. Set room side shift lever and T/M side manual control lever to "N" position. 2. ...

Copyright © www.ksmanual.com 2014-2025