Kia Sorento: High Mounted stop lamp Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Removal
| High Mounted Stop Lamp |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the tailgate trim.
(Refer to Body - "Body Side Moldings")
|
| 3. |
Remove the high mounted stop lamp assembly after removing nuts
(3EA).
|
License Lamps Installation
1.
Install the bulb.
2.
Install the license lamp lens.
...
High Mounted stop lamp Installation
1.
Install the high mounted stop lamp.
2.
Install the tailgate trim.
...
See also:
Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
3.
...
Water pump Troubleshooting
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the bleed hole of the water pump
Visually chec ...
Photo Sensor Description
The photo sensor is located at the center of the defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode.
The solar radiation received by its light receiving ...
Copyright В© www.ksmanual.com 2014-2024