Kia Sorento: Spark Plug Installation

Spark Plug Removal

1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Charging System

...

See also:

Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be rep ...

Replacement
The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...

Special Service Tools
Tool (Number and Name) IIIustration Use 09546-26000 Strut spring compressor Compression of coil spring ...