1. |
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
|
2. |
Using a spark plug wrench, remove the spark plug (A).
|
Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
Speakers Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
s ...
Compass Mirror Calibration Procedure
If the compass has been calibrated or set to variance zone number incorrectly,
or you are driving in specific places (tunnel, parking lot in building, underground
parking lot, near transforme ...