Kia Sorento: Starter Installation - Starting System - Engine Electrical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Starter Installation

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Engine Electrical System / Starting System / Starter Installation

1.
Install in the reverse order of removal.

Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

Starter Removal
1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - &quo ...

Starter Disassembly
1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2. After loosening the screws (A), detach the magnet switch assembly ...

See also:

Fuel Line Removal
1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. (Refer to the F ...

Components Location
1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Positi ...

SRS Control Module (SRSCM) Variant coding
After replacing the SRSCM with a new one, MUST perform the “Variant Coding” procedure.    1. ...

Copyright © www.ksmanual.com 2014-2025