Kia Sorento: Front Lower Arm Inspection

Front Lower Arm Removel

1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Front Stabilizer Bar Removel

1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

See also:

Inspection
Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TP ...

Blower Unit Components
1. Intake Case (LH) 2. Intake Case (RH) 3. Intake Door 4. Cowl Seal 5. NVH Seal 6. Blower Upper Case 7. Cluster Ionizer 8. Blower Lower Case 9. Power Mosfet (DAT ...

Specifications
Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] Fuel Tank Pre ...