Battery Removal
1.
Disconnect the battery (-) terminal and (+) terminal (A).
2.
Remove the battery mounting bracket (B) and the insulation pad
and then rem ...
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [C300-A]
Pin
No.
Description
Connected to
1
Ignition Coil (Cylinder #2) control output
[NON-smart ke ...